Tag Archive for: smoke

Smoke Detector Types, Which One to Use?

Smoke detector located on the ceiling If you didn’t already know, the two most commonly recognized smoke detector types are ionization smoke detection and photoelectric smoke detectionOh, and just an FYI, do not confuse “photoelectric” with “photochemical” as I did.  They are not the same.  The latter is the technology used in Carbon Monoxide (CO) detectors… which I’ll save for another post.

So, Ionization vs Photoelectric, which smoke detector types are right for me?  Is there really a difference?

To answer the first question, it depends.  To answer the second question, yes there really is.  Here’s the truth, you can ask 10 different people and get 10 different opinions.  From my seat, I think response time is the ultimate qualifier.  While both respond to fire in relatively short order, it’s the smoldering fire (no flame) that is the deciding factor for me.  Most people know that the #1 killer of fires is smoke inhalation, not the flames.  So wouldn’t we err on the side of caution and go with the technology that detects smoke the fastest?  The simple answer, yes, of course, we would.  And for that reason, photoelectric should be the clear winner.  However, it is important to acknowledge that not all fires are smoldering fires.  So, with that consideration, a device comprising both technologies would be the absolute winner.

Now, just like everything else that is good for us, there is a cost associated with the different technologies.  Photoelectric is more expensive than ionization, and combination units are more expensive than all others.  Ultimately, cost should be the least of your concerns when outfitting your home with smoke detection devices.  For me and my loved ones, combination units are the ones going in my home.

Hate reading? Check out this 5-minute video demonstrating the different smoke detector types.  It may just save your life!

Check out this video demonstrating the difference between the two technologies


Let’s take a deeper dive into the different smoke detector types.

• Ionization smoke alarms

Smoke filled room typical of house fires

The most common smoke detector types (usually due to cost) are Ionization smoke alarms.  These are generally more responsive to fires with visible flames or environments heavily saturated with smoke.
How they work: Ionization-type smoke alarms have a small amount of radioactive material between two electrically charged plates.  These plates ionize the air and cause current to flow between the plates. When smoke enters the chamber, it disrupts the flow of ions, thus reducing the flow of current and activating the alarm. Download this chart on ionization smoke alarms.

• Photoelectric smoke alarms

Smoldering couch fire from lit cigarette

Photoelectric smoke alarms are generally more responsive to fires that begin with a long period of smoldering (called “smoldering fires”).  Think of a cigarette that may not have been fully extinguished and dumped in the trash.  Another example is that of an overheating appliance that doesn’t actually burn but smokes before a flame is present.

How they work: Photoelectric-type alarms aim a light source into a sensing chamber at an angle away from the sensor. Smoke enters the chamber, reflects the light onto the sensor, thus triggering the alarm. Download this chart on photoelectric smoke alarms.

The U.S. Fire Administration (USFA) is aware that there is a controversy about smoke detector types and which is most appropriate to protect people in their homes. 

The body of scientific knowledge about fire, smoke, and smoke detection has developed over many years and is quite extensive. The USFA has either fully or partially funded a number of research efforts.  These include a recent study by the National Institute of Standards and Technology’s (NIST) Center for Fire Research. Other contributors to this data include the Consumer Product Safety Commission (CPSC), the National Fire Protection Association, Underwriters Laboratories, the Home Fire Safety Council, the Residential Fire Safety Institute, the Home Fire Sprinkler Coalition, and distinguished academics with expertise in smoke alarm and sensor technology.

The body of research reflects the following:

  • There are two types of smoke alarms in general use for home smoke alarms, Photoelectric and Ionization. These smoke alarms sense the presePost fire house image missing roof and most of the second floornce of smoke differently.
  • The type of smoke produced by fire depends on the type of fire. Flaming fires produce a different type of smoke than smoldering fires.
  • Both smoke alarms will detect the smoke from either a smoldering fire or a flaming fire. It has been established and well known for many years that:
    • Ionization smoke alarms tend to respond faster to the smoke produced by flaming fires than photoelectric smoke alarms.
    • Photoelectric smoke alarms tend to respond faster to the smoke produced by smoldering fires than ionization smoke alarms.
  • In some full-scale fire tests, the difference in the time to alarm between ionization and photoelectric smoke alarms was found to be trivial. In other full-scale fire tests, the difference in response time was considerable.

Based on this information, the USFA provides guidance to the public and to state and local legislative bodies.  Either body may be grappling with the issue of determining which smoke detector types to select for residential use.  Their guidance includes:

  • We cannot state that one type of alarm is better than another because every fire is different.
  • Because both ionization and photoelectric smoke alarms are better at detecting distinctly different yet potentially fatal fires, and because no one can predict what type of fire might start in a home, the USFA recommends that every home and place where people sleep be equipped with either
    • both ionization and photoelectric smoke alarms, or
    • dual sensor smoke alarms (which contain both ionization and photoelectric smoke sensors).
  • The location of a smoke alarm within a home may be more important than the type of smoke alarm present, depending on the location of a fire. The USFA recommends that users follow the manufacturer’s guidance along with current standards on the recommended location of smoke alarms in a home.

To wrap this up

For each of the smoke detector types, the advantage they provide may be critical to life safety in some fire situations.  Fatal home fires, day or night, include a large number of smoldering fires and a large number of flaming fires. You cannot predict the type of fire you may have in your home or when it will occur. Any smoke alarm technology, to be acceptable, must perform for both types of fires in order to provide sufficient warning. Regardless of the type of fire, for all times of the day or night, and whether you are asleep or awake.
For the best protection, use both types of smoke alarm technologies.

Copyright © 2020-, Realm Inspections, All rights reserved. Website by Spectora Hosting
Skip to content